Product Description
The KCA Kable (Kolossus Copper Aluminum) is the next generation of our Copper Clad Aluminum (CCA) power and ground cables. Succeeding its fellow KLM and KLMX models before it, the new KCA 4 Gauge uses the same of 29.44mm^2 of Copper Clad Aluminim (CCA) as previous models. Copper Clad Aluminum (CCA) is made up of 90% Aluminum and 10% Copper. The KCA Kable is equal in size to the Kolossus Kable, but is designed for lighter current loads and not lightening your wallet.
The KCA 4 Gauge Kable used throughout this kit offers incredible flexibility and a rugged PVC outer jacket that is impervious to grease and oil. The PVC outer jacket can with-stand the extreme temperatures (-40 to 105 C).
Additional matching 2 Channel Bassik 5 Meter RCA's are available on Amazon should you need one for a 4 channel installation
Beware of "1600 Watt" amp kits that include a 50 or 60A fuse. Its physically impossible for these kits to support this load (refer to our comparison photo)
How many watts can this amp kit handle? At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (two 30A fuses = 60A total draw) If this number is under 80A, this kit will fit your application. If over 80A, a larger gauge wire would be required or use our Kolossus Flex 4 gauge amp installation kit.
Visit our website to see a complete head to head amp kit review from top sellers on Amazon vs KnuKonceptz.
Product Details
- Brand: KnuKonceptz
- Model: KCA-K4
- Dimensions: 3.50 pounds
Features
- 18 Feet 4 Gauge Ultra Flex Blue KCA Power Wire
- 3 Feet 4 Gauge Ultra Flex Black KCA Ground Wire
- One inline fuse holder with 80A AGU Fuse
- One 17 Foot Black Bassik RCA Cable made from Oxygen Free Copper (OFC)
- 20 Feet TCA 14 Gauge CCA Speaker Wir
Most helpful customer reviews
29 of 31 people found the following review helpful.
Very Impressed
By Matt G
First let me start by saying that I'm not the kinda guy that usually takes the time to write a review, think this is my first ever and i do alotta online shopping...But I was so happy with this seller and their product that I felt like I owed them and everybody one. I ordered on a Monday morning and had my kit by early Wednesday afternoon! FAST! Like exactly 52 hours fast! Sure it does have something to do with me living in Ohio (same state as seller) but wow! And I only used standard shipping too. The 1200 watt amp I ordered from E&B hasn't even been processed yet and I ordered that at the same time...Anyways, I'm not a professional installer, however I've hooked up over 10 systems over the years-and this is a damn good install kit for the money. Nice and flexible power wire with real quality sheathing. O.D. of 4ga wire is a half inch and wire itself is a solid 5/16 thick. Nice heavy duty in line fuse and all the terminals you need-unless you're running more than a mono sub(kit has all power wire terminals, but only 3 small spades-1 for remote turn on and two for sub +/- ,wire ties, grommets, etc.) A little bummed about the terminals though-they're not cheapies but not the best. But then again this isn't a Scosche or Monster $100 competition kit. If you're a DIY guy on a budget, and don't wanna skimp then this is for you. Stay away from the $10 Boss kits,trust me... I've never come across this kind of quality ever before in this price range. Hats off to you, Knu Konceptz Crew! Outstanding across the board!
28 of 36 people found the following review helpful.
Horrible Customer Service
By EDD107
I purchased this cable less than a year ago and it is already ruined. My amp began going into protect mode so I took out the handy DMM. I checked the voltage and noticed the significant drop. I thought it was my amps gain setting too high but I had calibrated it with an Oscilloscope so I ruled that out. I then went to check my fuse holder and everything looked fine. I then decided to remove the wire and take a look. To my surprise the wire was burnt. I thought it was just at the end piece so I decided to cut it off. I later found out it extended out to almost the whole wire. I will upload images. My amps max output voltage was set to 30 volts so I was getting 450 watts (30volts^2=900/2ohms=450watts). Even with a voltage drop of 11volts which is minimum before protect mode it would only be pulling approximately 40amps. My car however provides a constant of 14.4volts with it dropping to 13 with ac and all electrical components on including the amp previous to the cable damaging. I decided the cable truely wasn't capable of the alleged 60 amp rating so I contacted KnuKonceptz. Not only did it take them 3 days to reply but they have stopped replying completely it has been 9+ days without a reply. They were extremely unprofessional and this can be seen as well through their replies to comments on the item page. Even if the customer has no clue what he is talking about doesn't give them the right to post comments in such a rude manner. Im still waiting for a reply.
Update (4/11/2013): I still have not received a reply. The images I uploaded got removed. I'm guessing they want to keep their products looking top notch. On the other hand once you pay the words "Customer Service" do not exist in their dictionary. Dropped from 2 stars to 1 for hiding the truth and not letting customers see the images.
3 of 3 people found the following review helpful.
Great Wire
By Scott
This is a great wire for the price. Though it is copper PLATED it is still a good buy. The only problem I had wit the package was the RCA's didn't work on one channel. I had to Order a new set of RCA's as soon as I hooked it up in my car. I would only recommend this to someone who already has a set of RCA cables.
Tidak ada komentar:
Posting Komentar